Piece Corvette Chevrolet

Save up to 35% Daily deals. CARiD Wheels & Tires. For Chevy Corvette 06-13 Performance Drilled 2-Piece Front Big Brake Kit. Part Number: 83.186.4700.62. In Stock: Ships in 2 days. On the go Daily Deals. Always the correct part. We know our products. Performance Drilled 2-Piece Front Big Brake Kit (83.186.4700.62) by StopTech®. They feature fully forged calipers with patented stiffening bridges, patented 2-piece AeroRotors for optimized cooling, braided stainless steel brake lines, performance brake pads, mounting brackets and all necessary hardware to complete the installation. StopTech Big Brake Kits were the first Balanced Brake Upgrades on the market, offering optimized brake bias to utilize all the traction available from all four tires. Minimum Wheel Diameter Required: 457.2mm (18). Driving Style: Performance / Racing, Track Only. Rotor Thickness: 32mm (1.26). Outside Diameter: 355mm (14). Rotor Material: Cast Iron. Rotor Coating: W/O Coating. Rotor Finish: Drilled, No Coating. Stiffest aftermarket caliper available gives a consistent firm pedal. Fully machined and lightweight for track action. Fully forged and extremely stiff for firmer brake pedal feel. Meticulously engineered 2-piece design reduces flex. Patented, removable center bridge further resists yaw(flex). Carefully selected piston sizes for precise torque output. Specifically engineered and patented AeroVanes for optimum cooling. Patented, billet 7075 aluminum AeroHats for improved airflow. Full-floating mounting hardware to eliminate pad knock-back. Optimized to provide even performance and consistent feedback. Hard-anodized hats are impervious to color change or fading. Stainless steel studs secured with set screws for strength and durability. Fully machined aluminum or steel that is precise and strong. Application specific design for precise and proper fitment. Stainless steel braiding for lower compliance and extra protection. A variety of fittings for hundreds of applications. All necessary brackets and fasteners for easy installation. Patented design with directional stand offs between the rotor and mounting bell. Increases airflow by 50%-100% over traditional 2-piece designs. Increased airflow reduces the temperature difference between the inside and outside rotor faces. Results in less distortion and better performance compared to other fully floating designs. Outer pad wear is reduced. Drilled holes create an escape route for debris, dust, gases, and water. Drilling reduces stopping distances in wet weather. Drilled rotors improve the appearance of your wheels and provide reduced rotor weight. Vented type of rotors offers much faster heat dissipation. Multi-piston calipers provide clamping force on both sides of the rotor at the same time and uniformly transfer braking force to the brake pads. Caliper pistons are hollow to save weight. Aluminum caliper body allows for exceptional light weight (up to 40% of weight savings) and ensures superior corrosion resistance. Caliper heat-resistant coating prevent cracking and fading. Fixed calipers create friction from the brake pads on both sides of the rotor at minimum time interval. StopTech Big Brake Kits exceed stock performance in two key areas: First, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel and confidence-inspiring responsiveness. The key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle’s stock front-to-rear brake torque ratio. That is why StopTech developed the Balanced Brake Upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking. Every StopTech Balanced Big Brake Kit is engineered to produce that optimal balance using caliper bores and pistons specifically selected and tested for each vehicle application. This is what sets StopTech apart from off-the-shelf solutions. In contrast, a brake upgrade that adds too much front torque (as many do), will reduce your car’s ability to maximize the traction available from all four tires, robbing you of performance. In addition, a system that uses too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, limiting a driver’s control of brake input. They include forged, lightweight StopTech ST calipers, floating, slotted AeroRotors, stainless steel brake lines, and race engineered caliper brackets. StopTech Performance Kits feature ultra-high performance ST lightweight forged calipers in six-piston, four-piston or two-piston configurations. No matter whether you’re doing basic repairs and maintenance, modifying your car’s street appeal and performance, or adding high-tech lighting and electronics, our great selection of brand name products and knowledgeable associates will ensure success with all your automotive projects. We offer the finest and widest variety of automotive parts and accessories using state-of-the-art technologies, and employ the most dedicated and creative team members. These individuals focus on exceeding expectations of customers who want the exact component at the best price in the quickest time. Our goal is to provide a WOW experience during every customer interaction. Whatever you need, whether it’s a replacement part to fix a broken down vehicle, a crash part to repair a vehicle from an accident, perhaps a new set of custom wheels and tires, or something to make it flashy or faster, lifted or lowered, we will be your one-stop shop. We fulfill our mission daily with enthusiasm and optimism, learning from our ongoing opportunities and successes. We enjoy a modern yet tricked out work atmosphere while ensuring a true learning environment to develop our people. The item “For Chevy Corvette 06-13 Performance Drilled 2-Piece Front Big Brake Kit” is in sale since Monday, July 6, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “caridautoparts” and is located in Carson, California. This item can be shipped to United States.

• Brand: StopTech
• Manufacturer Part Number: 83.186.4700.62
• Other Part Number: 257933687
• Product Type: Performance Brakes, Pads & Rotors
• Product SubType: Performance Brake Kits
• UPC: 805890841104
• Product Thickness: 32mm (1.26″)
• Solid or Vented Rotor: Vented
• Rotor Style: Drilled
• Rotor Material: Cast Iron
• Rotor Construction: 2-Piece
• Outside Diameter: 355mm (14″)
• Driving Style: Track Only, Performance / Racing
• Caliper Type: 4-Piston
• Caliper Construction: Fixed
• Caliper Color: Silver
• Brake Kit Type: Big Brake Kits
• Brand Type: Genuine OEM
• Brakes Location: Front
• Series: Performance
• Placement on Vehicle: Front
• Material: Iron
• Fitment Type: Performance/Custom
• Product Details: Performance Big Brake Kit
• Product Name: Big Brake Kit