For Chevy Corvette 97-04 SP Performance Cross Drilled 1-Piece Rear Brake Rotors

For-Chevy-Corvette-97-04-SP-Performance-Cross-Drilled-1-Piece-Rear-Brake-Rotors-01-jls For Chevy Corvette 97-04 SP Performance Cross Drilled 1-Piece Rear Brake Rotors
For Chevy Corvette 97-04 SP Performance Cross Drilled 1-Piece Rear Brake Rotors
For Chevy Corvette 97-04 SP Performance Cross Drilled 1-Piece Rear Brake Rotors
For Chevy Corvette 97-04 SP Performance Cross Drilled 1-Piece Rear Brake Rotors

For Chevy Corvette 97-04 SP Performance Cross Drilled 1-Piece Rear Brake Rotors
Save up to 35% Daily deals. CARiD Wheels & Tires. For Chevy Corvette 97-04 SP Performance Cross Drilled 1-Piece Rear Brake Rotors. In Stock: Ships in 2 days. On the go Daily Deals. Always the correct part. We know our products. Cross Drilled Vented 1-Piece Rear Brake Rotors (C55-045-BP) by SP Performance┬«. Quantity: 2 Per Pack. Don’t get the fades! Aggressive driving, stop and go traffic, and emergency stops can give you the fades. Brake fade that is. SP Performance Cross Drilled Rotors stop the fades by venting gasses through the holes bringing your vehicle to a screeching halt. SP Performance Cross Drilled Brake Rotors have a design that offers the best possible cooling and venting of brake pad gasses, brake dust and moisture. Unlike SP Performance competition there is no sharp edge on SP Performance chamfer. This is accomplished by the use of an outer radius curve rather than a countersink. With the radius curve, or Sinusoid Curve it virtually eliminates an edge on the surface of the hole. This smooth surface also makes the rotor more pad friendly by reducing the wear of the pad caused by the friction scraping against a sharp edge. Rotor coating will disappear with time where the brake pads contact the rotor. Driving Style: Performance / Racing. Rotor Design: Rotors Only. Rotor Material: Cast Iron. Rotor Finish: Black Zinc. Rotor Vane Type: Directional. Rotor Diameter: 304.8mm (12). Lug Holes Quantity: 5. Sized to match OEM dimensions while providing superior braking performance. Best quality, performance, reliability and appearance. Hassle free, bolt-on performance. SP’s exclusive sinusoid curve chamfer. Increased brake pad bite. Vents gases and eliminates brake fade. Optimized air circulation for best cooling. Corrosion resistant coating for long-lasting protection against rust. Improved wet weather stopping. Most cost effective way of improving your vehicles braking performance. Guaranteed not to crack for the life of the rotors. Runs cool and look cool behind your wheels. Made using durable materials to endure for a long time. Designed to combine excellent performance and reliability. Guaranteed to provide exceptional wear resistance. Made to provide matchless quality and improve your driving comfort. Proudly made in the USA. SP Cross Drilled Rotors are designed with structural integrity in mind. Each rotor structure is carefully analyzed and the best pattern is utilized for strength and integrity. The holes are drilled with SP Performance exclusive Sinusoid Curve Chamfer, which promotes cooling and minimizes stress. The chamfer maximizes air circulation, and with absolutely no sharp edge, it reduces the possibility of heat checking and increases both rotor and pad life. Cross Drilled Anti-Corrosion Finish. Corrosion resistant finishes give a dazzling clean look behind your wheels while preventing rust, corrosion and oxidation. SP Performance Cross Drilled Brake Rotors With Gray ZRC Finish: The ZRC coating provides long-lasting protection against corrosion in the most hostile salt-water environments. After being applied, ZRC provides the highest level of galvanic protection. The film of ZRC is conductive. After the coating heats up during use, it bonds permanently to the metal surface. It will not allow the metal to corrode, even when the surface is scratched. SP’s Advanced Sinusoidal Curved Chamfered Hole. With many years of development SP have come up with a drilling and chamfering method that absolutely has no sharp edges. SP Performance cross drilled discs are drilled with an exclusive sinusoid curved chamfer. This type of chamfer promotes cooling, minimizes stress, vents moisture and dust while minimizing heat checking and cracking. The smooth design also increases both rotor and pad life. Advanced Drilling methods put SP Performance Cross Drilled Brake Rotors above the rest in quality, performance, reliability and appearance. SP Performance Cross Drilled Rotors provide many advantages like quality, durability, looks and value. But the most important advantage is that your vehicle will stop quicker. SP Performance Cross Drilled Brake Discs provide up to 30% better braking. If, for example, your vehicle takes 30 feet to come to a stop with your stock rotors, then a 30% improvement is equal to 9 feet. During an emergency stop, 9 feet can make all the difference between a safe stop and a dangerous accident. No matter whether you’re doing basic repairs and maintenance, modifying your car’s street appeal and performance, or adding high-tech lighting and electronics, our great selection of brand name products and knowledgeable associates will ensure success with all your automotive projects. We offer the finest and widest variety of automotive parts and accessories using state-of-the-art technologies, and employ the most dedicated and creative team members. These individuals focus on exceeding expectations of customers who want the exact component at the best price in the quickest time. Our goal is to provide a WOW experience during every customer interaction. Whatever you need, whether it’s a replacement part to fix a broken down vehicle, a crash part to repair a vehicle from an accident, perhaps a new set of custom wheels and tires, or something to make it flashy or faster, lifted or lowered, we will be your one-stop shop. We fulfill our mission daily with enthusiasm and optimism, learning from our ongoing opportunities and successes. We enjoy a modern yet tricked out work atmosphere while ensuring a true learning environment to develop our people. The item “For Chevy Corvette 97-04 SP Performance Cross Drilled 1-Piece Rear Brake Rotors” is in sale since Friday, October 12, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “caridautoparts” and is located in Simsbury, Connecticut. This item can be shipped to United States.
  • Brand: SP Performance
  • Manufacturer Part Number: C55-045-BP
  • Other Part Number: 886448345
  • Product Type: Performance Brakes, Pads & Rotors
  • Product SubType: Performance Brake Rotors
  • UPC: Does not apply
  • Solid or Vented Rotor: Vented
  • Rotor Style: Drilled
  • Rotor Material: Cast Iron
  • Rotor Finish: Black Zinc
  • Rotor Diameter: 304.8mm (12″)
  • Rotor Design: Rotors Only
  • Rotor Construction: 1-Piece
  • Number of Pieces: 2 per Pack
  • Lug Holes Quantity: 5
  • Driving Style: Performance / Racing
  • Brand Type: Aftermarket Branded
  • Brakes Location: Rear
  • Placement on Vehicle: Rear
  • Material: Iron
  • Product Name: Brake Rotors
  • Fitment Type: Performance/Custom
  • Product Details: Performance Brake Drilled Rotor
  • Finish: Black
  • Department: Performance

For Chevy Corvette 97-04 SP Performance Cross Drilled 1-Piece Rear Brake Rotors
- No Comments on this Post -