For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor

For-Chevy-Corvette-06-13-AeroRotor-Drilled-2-Piece-Front-Driver-Side-Brake-Rotor-01-br For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor

For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
Save up to 35% Daily deals. CARiD Wheels & Tires. For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor. Part Number: 129.62102.15. In Stock: Ships in 3 days. On the go Daily Deals. Always the correct part. We know our products. AeroRotor Drilled Vented 2-Piece Front Driver Side Brake Rotor (129.62102.15) by StopTech®. Quantity: 1 Per Pack. StopTech® AeroRotor® Replacement Kits (ARK) are designed to replace your vehicle’s original factory rotors, while retaining the factory brake calipers. AeroRotorT Drilled Vented 2-Piece Front Driver Side Brake Rotor (129.62102.15) by StopTech®. Driving Style: Performance / Racing. Rotor Material: Cast Iron. Specifically engineered and patented AeroVanes for optimum cooling. Patented, billet 7075 aluminum AeroHats for improved airflow. Full-floating mounting hardware to eliminate pad knock-back. Optimized to provide even performance and consistent feedback. Hard-anodized hats are impervious to color change or fading. Stainless steel studs secured with set screws for strength and durability. Application specific design for precise and proper fitment. All necessary hardware for easy installation. Patented design with directional stand offs between the rotor and mounting bell. Increase airflow by 50%-100% over traditional 2-piece designs. Increased airflow reduces the temperature difference between the inside and outside rotor faces. Results in less distortion and better performance compared to other fully floating designs. Outer pad wear is reduced. Proudly made in the USA. Ensure increased pad bite and higher friction level. Drilled holes provide dust and water dissipation. Improve the appearance of your wheels. Provide reduced rotor weight. Vented design offers much faster heat dissipation. The directional, floating AeroRotors allow independent expansion of the rotor and hat without “coning, ” thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design, pre-assembled to billet aluminium AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80% more air than factory rotors for better cooling and reduced fade on the track. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat, friction material and debris, assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion, zinc finish is available for customers in cold climates, where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100% made in the USA. The patented 2-piece AeroRotor assembly uses uniquely designed and patented AeroVanes® inside the disc to optimize airflow through the rotor. This improved directional design minimizes turbulence and flows up to 61 percent more air than any other rotor tested. The result is up to 80 percent better airflow over original equipment rotors and 10-30 percent better airflow than other directional vane racing rotors currently available. Better airflow equals better cooling, and better cooling means less fade and better overall brake system performance. StopTech AeroRotors also feature a proprietary alloy chemistry. By adding molybdenum to the gray iron, carefully targeting a narrow range of hardness and tensile strength values, and controlling the cooling rate of the rotor after casting, StopTech produces a friction ring with added crack resistance as well as improved functionality. Super strong Inconel® drive pin washers – as used in aircraft engines and other racing applications – are practically impervious to oxidation or corrosion even at extreme temperatures. Street rotors use a curved drive pin washer to add tension to the hat assembly, reducing rattle. Race applications use a flat washer that allows full freedom of movement between hat and friction ring. StopTech AeroHats feature directional stand offs to further improve airflow and cool the rotor. Elongated drive pin slots allow separate expansion of rotor and hat to resist coning. Tapered slots allow evacuation of debris that might otherwise accumulate with straight-cut slots. Drive pins used to affix the hat to the rotor have a slightly out-of-round hole and are self-locking. They withstand high temperatures much better than typical lock washers and allow drive pins to move freely, yet securely, as hat and rotor expand at different rates. In certain applications where packaging is an issue – such as on the Chevrolet Corvette – StopTech uses slant-head drive pins to provide improved clearance as pads wear. No matter whether you’re doing basic repairs and maintenance, modifying your car’s street appeal and performance, or adding high-tech lighting and electronics, our great selection of brand name products and knowledgeable associates will ensure success with all your automotive projects. We offer the finest and widest variety of automotive parts and accessories using state-of-the-art technologies, and employ the most dedicated and creative team members. These individuals focus on exceeding expectations of customers who want the exact component at the best price in the quickest time. Our goal is to provide a WOW experience during every customer interaction. Whatever you need, whether it’s a replacement part to fix a broken down vehicle, a crash part to repair a vehicle from an accident, perhaps a new set of custom wheels and tires, or something to make it flashy or faster, lifted or lowered, we will be your one-stop shop. We fulfill our mission daily with enthusiasm and optimism, learning from our ongoing opportunities and successes. We enjoy a modern yet tricked out work atmosphere while ensuring a true learning environment to develop our people. The item “For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor” is in sale since Monday, June 24, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “caridautoparts” and is located in Carson, California. This item can be shipped to United States.
  • Brand: StopTech
  • Manufacturer Part Number: 129.62102.15
  • Other Part Number: 203995854
  • Product Type: Performance Brakes, Pads & Rotors
  • Product SubType: Performance Brake Rotors
  • UPC: 899590002453
  • Solid or Vented Rotor: Vented
  • Rotor Style: Drilled
  • Rotor Material: Cast Iron
  • Rotor Finish: Bare
  • Rotor Construction: 2-Piece
  • Number of Pieces: 1 per Pack
  • Driving Style: Performance / Racing
  • Brand Type: Aftermarket Branded
  • Brakes Location: Front
  • Product Name: Brake Rotor
  • Series: AeroRotor
  • Placement on Vehicle: Front, Left
  • Material: Iron
  • Fitment Type: Performance/Custom
  • Product Details: Performance Brake Drilled Rotor
  • Finish: Natural
  • Department: Performance
  • California Prop 65 Warning: Cancer and Reproductive Harm.

For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
- No Comments on this Post -