1988 Chevrolet Corvette Retro Review

1988-Chevrolet-Corvette-Retro-Review-01-cjc

For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor

For-Chevy-Corvette-06-13-AeroRotor-Drilled-2-Piece-Front-Driver-Side-Brake-Rotor-01-br For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor

For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor
Save up to 35% Daily deals. CARiD Wheels & Tires. For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor. Part Number: 129.62102.15. In Stock: Ships in 3 days. On the go Daily Deals. Always the correct part. We know our products. AeroRotor Drilled Vented 2-Piece Front Driver Side Brake Rotor (129.62102.15) by StopTech®. Quantity: 1 Per Pack. StopTech® AeroRotor® Replacement Kits (ARK) are designed to replace your vehicle’s original factory rotors, while retaining the factory brake calipers. AeroRotorT Drilled Vented 2-Piece Front Driver Side Brake Rotor (129.62102.15) by StopTech®. Driving Style: Performance / Racing. Rotor Material: Cast Iron. Specifically engineered and patented AeroVanes for optimum cooling. Patented, billet 7075 aluminum AeroHats for improved airflow. Full-floating mounting hardware to eliminate pad knock-back. Optimized to provide even performance and consistent feedback. Hard-anodized hats are impervious to color change or fading. Stainless steel studs secured with set screws for strength and durability. Application specific design for precise and proper fitment. All necessary hardware for easy installation. Patented design with directional stand offs between the rotor and mounting bell. Increase airflow by 50%-100% over traditional 2-piece designs. Increased airflow reduces the temperature difference between the inside and outside rotor faces. Results in less distortion and better performance compared to other fully floating designs. Outer pad wear is reduced. Proudly made in the USA. Ensure increased pad bite and higher friction level. Drilled holes provide dust and water dissipation. Improve the appearance of your wheels. Provide reduced rotor weight. Vented design offers much faster heat dissipation. The directional, floating AeroRotors allow independent expansion of the rotor and hat without “coning, ” thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design, pre-assembled to billet aluminium AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80% more air than factory rotors for better cooling and reduced fade on the track. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat, friction material and debris, assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion, zinc finish is available for customers in cold climates, where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100% made in the USA. The patented 2-piece AeroRotor assembly uses uniquely designed and patented AeroVanes® inside the disc to optimize airflow through the rotor. This improved directional design minimizes turbulence and flows up to 61 percent more air than any other rotor tested. The result is up to 80 percent better airflow over original equipment rotors and 10-30 percent better airflow than other directional vane racing rotors currently available. Better airflow equals better cooling, and better cooling means less fade and better overall brake system performance. StopTech AeroRotors also feature a proprietary alloy chemistry. By adding molybdenum to the gray iron, carefully targeting a narrow range of hardness and tensile strength values, and controlling the cooling rate of the rotor after casting, StopTech produces a friction ring with added crack resistance as well as improved functionality. Super strong Inconel® drive pin washers – as used in aircraft engines and other racing applications – are practically impervious to oxidation or corrosion even at extreme temperatures. Street rotors use a curved drive pin washer to add tension to the hat assembly, reducing rattle. Race applications use a flat washer that allows full freedom of movement between hat and friction ring. StopTech AeroHats feature directional stand offs to further improve airflow and cool the rotor. Elongated drive pin slots allow separate expansion of rotor and hat to resist coning. Tapered slots allow evacuation of debris that might otherwise accumulate with straight-cut slots. Drive pins used to affix the hat to the rotor have a slightly out-of-round hole and are self-locking. They withstand high temperatures much better than typical lock washers and allow drive pins to move freely, yet securely, as hat and rotor expand at different rates. In certain applications where packaging is an issue – such as on the Chevrolet Corvette – StopTech uses slant-head drive pins to provide improved clearance as pads wear. No matter whether you’re doing basic repairs and maintenance, modifying your car’s street appeal and performance, or adding high-tech lighting and electronics, our great selection of brand name products and knowledgeable associates will ensure success with all your automotive projects. We offer the finest and widest variety of automotive parts and accessories using state-of-the-art technologies, and employ the most dedicated and creative team members. These individuals focus on exceeding expectations of customers who want the exact component at the best price in the quickest time. Our goal is to provide a WOW experience during every customer interaction. Whatever you need, whether it’s a replacement part to fix a broken down vehicle, a crash part to repair a vehicle from an accident, perhaps a new set of custom wheels and tires, or something to make it flashy or faster, lifted or lowered, we will be your one-stop shop. We fulfill our mission daily with enthusiasm and optimism, learning from our ongoing opportunities and successes. We enjoy a modern yet tricked out work atmosphere while ensuring a true learning environment to develop our people. The item “For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor” is in sale since Monday, June 24, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “caridautoparts” and is located in Carson, California. This item can be shipped to United States.
  • Brand: StopTech
  • Manufacturer Part Number: 129.62102.15
  • Other Part Number: 203995854
  • Product Type: Performance Brakes, Pads & Rotors
  • Product SubType: Performance Brake Rotors
  • UPC: 899590002453
  • Solid or Vented Rotor: Vented
  • Rotor Style: Drilled
  • Rotor Material: Cast Iron
  • Rotor Finish: Bare
  • Rotor Construction: 2-Piece
  • Number of Pieces: 1 per Pack
  • Driving Style: Performance / Racing
  • Brand Type: Aftermarket Branded
  • Brakes Location: Front
  • Product Name: Brake Rotor
  • Series: AeroRotor
  • Placement on Vehicle: Front, Left
  • Material: Iron
  • Fitment Type: Performance/Custom
  • Product Details: Performance Brake Drilled Rotor
  • Finish: Natural
  • Department: Performance
  • California Prop 65 Warning: Cancer and Reproductive Harm.

For Chevy Corvette 06-13 AeroRotor Drilled 2-Piece Front Driver Side Brake Rotor

Framed Chevrolet Corvette Night Car Poster 5 Piece Canvas Print Wall Art Decor

Framed-Chevrolet-Corvette-Night-Car-Poster-5-Piece-Canvas-Print-Wall-Art-Decor-01-tt Framed Chevrolet Corvette Night Car Poster 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Night Car Poster 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Night Car Poster 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Night Car Poster 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Night Car Poster 5 Piece Canvas Print Wall Art Decor

Framed Chevrolet Corvette Night Car Poster 5 Piece Canvas Print Wall Art Decor
If you order your print FRAMED (which we highly recommend), you will receive it professionally stretched, mounted and framed. Ready to hang with no additional work required! It is up to you at that point if you would like to put them up flat on your wall, have them framed locally, or frame them yourself. Any product you return must be in the same condition you received it and in the original packaging. We will try our best to solve it for you. We work hard to ensure that every customer is satisfied. The world will become better when we do good things every day. Thank you so much! Thank you for visiting our store! The item “Framed Chevrolet Corvette Night Car Poster 5 Piece Canvas Print Wall Art Decor” is in sale since Friday, May 10, 2019. This item is in the category “Home & Garden\Home Décor\Posters & Prints”. The seller is “luxuryprint” and is located in Shanghai. This item can be shipped worldwide.
  • Country/Region of Manufacture: China
  • Style: Art Deco
  • Material: Fabric
  • Original/Reproduction: Original
  • Type: Poster
  • Features: Framed
  • Color: Multi-Color
  • Subject: Art
  • Coating: Water-Proof
  • Brand: Corvette
  • Bundle Listing: No

Framed Chevrolet Corvette Night Car Poster 5 Piece Canvas Print Wall Art Decor

Delphi GN10165 Round Ignition Coil Set of 4 for Chevy GMC Cadillac Pontiac Buick

Delphi-GN10165-Round-Ignition-Coil-Set-of-4-for-Chevy-GMC-Cadillac-Pontiac-Buick-01-an Delphi GN10165 Round Ignition Coil Set of 4 for Chevy GMC Cadillac Pontiac Buick
Delphi GN10165 Round Ignition Coil Set of 4 for Chevy GMC Cadillac Pontiac Buick
Delphi GN10165 Round Ignition Coil Set of 4 for Chevy GMC Cadillac Pontiac Buick
Delphi GN10165 Round Ignition Coil Set of 4 for Chevy GMC Cadillac Pontiac Buick
Delphi GN10165 Round Ignition Coil Set of 4 for Chevy GMC Cadillac Pontiac Buick

Delphi GN10165 Round Ignition Coil Set of 4 for Chevy GMC Cadillac Pontiac Buick
Delphi GN10165 Round Ignition Coil Set of 4 for Chevy GMC Cadillac Pontiac Buick. Watch Our How To Video. Ignition Coil Features & Benefits. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. 2008-09 Buick Allure V8 5.3L with Round Style Coil Ignition Coil Set. 2008-09 Buick LaCrosse V8 5.3L with Round Style Coil Ignition Coil Set. 2005-07 Buick Rainier V8 5.3L with Round Style Coil Ignition Coil Set. 2009-17 Cadillac CTS V Ignition Coil Set. 2006-07 Cadillac CTS V with Round Style Coil Ignition Coil Set. 2007-17 Cadillac Escalade with Round Style Coil Ignition Coil Set. 2007-17 Cadillac Escalade ESV with Round Style Coil Ignition Coil Set. 2007-12 Cadillac Escalade EXT with Round Style Coil Ignition Coil Set. 2007-12 Chevrolet Avalanche with Round Style Coil Ignition Coil Set. 2010-17 Chevrolet Camaro V8 6.2L with Round Style Coil Ignition Coil Set. 2009-12 Chevrolet Colorado V8 5.3L with Round Style Coil Ignition Coil Set. 2005-17 Chevrolet Corvette with Round Style Coil Ignition Coil Set. 2008-12 Chevrolet Express 1500 Van V8 5.3L with Round Style Coil Ignition Coil Set. 2008-17 Chevrolet Express 2500 Van V8 6.0L with Round Style Coil Ignition Coil Set. 2008-17 Chevrolet Express 2500 Van V8 4.8L with Round Style Coil Ignition Coil Set. 2008-17 Chevrolet Express 3500 Van V8 6.0L with Round Style Coil Ignition Coil Set. 2008-17 Chevrolet Express 3500 Van V8 4.8L with Round Style Coil Ignition Coil Set. 2006-09 Chevrolet Impala V8 5.3L with Round Style Coil Ignition Coil Set. 2006-07 Chevrolet Monte Carlo V8 5.3L with Round Style Coil Ignition Coil Set. 2009-17 Chevrolet Silverado 1500 V8 6.2L with Round Style Coil Ignition Coil Set. 2015-17 Chevrolet Silverado 1500 V6 4.3L with Round Style Coil Ignition Coil Set. 2008-09 Chevrolet Silverado 1500 V8 6.0L with Round Style Coil Ignition Coil Set. 2008-12 Chevrolet Silverado 1500 V8 4.8L with Round Style Coil Ignition Coil Set. 2008-17 Chevrolet Silverado 1500 V8 5.3L with Round Style Coil Ignition Coil Set. 2007 Chevrolet Silverado 1500 with New Body Style V8 6.0L with Round Style Coil Ignition Coil Set. 2007 Chevrolet Silverado 1500 with New Body Style V8 5.3L with Round Style Coil Ignition Coil Set. 2007 Chevrolet Silverado 1500 with New Body Style V8 4.8L with Round Style Coil Ignition Coil Set. 2007 Chevrolet Silverado 2500 HD with New Body Style V8 6.0L with Round Style Coil Ignition Coil Set. 2008-17 Chevrolet Silverado 2500 HD V8 6.0L with Round Style Coil Ignition Coil Set. 2008-17 Chevrolet Silverado 3500 HD V8 6.0L with Round Style Coil Ignition Coil Set. 2007 Chevrolet Silverado 3500 HD with New Body Style V8 6.0L with Round Style Coil Ignition Coil Set. 2015-17 Chevrolet SS with Round Style Coil Ignition Coil Set. 2005-06 Chevrolet SSR with Round Style Coil Ignition Coil Set. 2015-17 Chevrolet Suburban Ignition Coil Set. 2007-12 Chevrolet Suburban 1500 with Round Style Coil Ignition Coil Set. 2007-12 Chevrolet Suburban 2500 with Round Style Coil Ignition Coil Set. 2007-17 Chevrolet Tahoe with Round Style Coil Ignition Coil Set. 2006-08 Chevrolet Trailblazer V8 5.3L with Round Style Coil Ignition Coil Set. 2006-09 Chevrolet Trailblazer V8 6.0L with Round Style Coil Ignition Coil Set. 2005-06 Chevrolet Trailblazer EXT with Round Style Coil Ignition Coil Set. 2009-12 GMC Canyon V8 5.3L with Round Style Coil Ignition Coil Set. 2005-09 GMC Envoy V8 5.3L with Round Style Coil Ignition Coil Set. 2005-06 GMC Envoy XL with Round Style Coil Ignition Coil Set. 2005 GMC Envoy XUV V8 5.3L with Round Style Coil Ignition Coil Set. 2008-12 GMC Savana 1500 Van V8 5.3L with Round Style Coil Ignition Coil Set. 2008-17 GMC Savana 2500 Van V8 6.0L with Round Style Coil Ignition Coil Set. 2008-17 GMC Savana 2500 Van V8 4.8L with Round Style Coil Ignition Coil Set. 2008-17 GMC Savana 3500 Van V8 6.0L with Round Style Coil Ignition Coil Set. 2008-17 GMC Savana 3500 Van V8 4.8L with Round Style Coil Ignition Coil Set. 2015-17 GMC Sierra 1500 V6 4.3L with Round Style Coil Ignition Coil Set. 2007 GMC Sierra 1500 with New Body Style V8 6.2L with Round Style Coil Ignition Coil Set. 2007 GMC Sierra 1500 with New Body Style V8 5.3L with Round Style Coil Ignition Coil Set. 2007 GMC Sierra 1500 with New Body Style V8 4.8L with Round Style Coil Ignition Coil Set. 2008-12 GMC Sierra 1500 V8 6.0L with Round Style Coil Ignition Coil Set. 2008-12 GMC Sierra 1500 V8 4.8L with Round Style Coil Ignition Coil Set. 2008-17 GMC Sierra 1500 V8 6.2L with Round Style Coil Ignition Coil Set. 2008-17 GMC Sierra 1500 V8 5.3L with Round Style Coil Ignition Coil Set. 2008-17 GMC Sierra 2500 HD V8 6.0L with Round Style Coil Ignition Coil Set. 2007 GMC Sierra 2500 HD with New Body Style V8 6.0L with Round Style Coil Ignition Coil Set. 2008-17 GMC Sierra 3500 HD V8 6.0L with Round Style Coil Ignition Coil Set. 2007 GMC Sierra 3500 HD with New Body Style V8 6.0L with Round Style Coil Ignition Coil Set. 2007-17 GMC Yukon with Round Style Coil Ignition Coil Set. 2015-17 GMC Yukon XL with Round Style Coil Ignition Coil Set. 2007-12 GMC Yukon XL 1500 with Round Style Coil Ignition Coil Set. 2007-12 GMC Yukon XL 2500 with Round Style Coil Ignition Coil Set. 2008-09 Hummer H2 with Round Style Coil Ignition Coil Set. 2008-10 Hummer H3 with Round Style Coil Ignition Coil Set. 2009-10 Hummer H3T with Round Style Coil Ignition Coil Set. 2005-06 Isuzu Ascender V8 5.3L with Round Style Coil Ignition Coil Set. 2009 Pontiac G8 V8 6.2L with Round Style Coil Ignition Coil Set. 2008-09 Pontiac G8 V8 6.0L with Round Style Coil Ignition Coil Set. 2005-08 Pontiac Grand Prix V8 5.3L with Round Style Coil Ignition Coil Set. 2005-06 Pontiac GTO with Round Style Coil Ignition Coil Set. 2005-09 Saab 9-7X V8 5.3L with Round Style Coil Ignition Coil Set. The item “Delphi GN10165 Round Ignition Coil Set of 4 for Chevy GMC Cadillac Pontiac Buick” is in sale since Thursday, April 14, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Coils, Modules & Pick-Ups”. The seller is “www.1aautomotive.com” and is located in Gardner, Kansas. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Brand: Delphi
  • Manufacturer Part Number: DEEEK00001
  • Other Part Number: DEEEK00001
  • Fitment Type: Direct Replacement
  • Interchange Part Number: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 9-7X
  • Superseded Part Number: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 9-7X
  • Warranty: Lifetime

Delphi GN10165 Round Ignition Coil Set of 4 for Chevy GMC Cadillac Pontiac Buick

Chevrolet Corvette C5 97-04 Body Kit Creations Carbon Fiber ZR Edition 6 Piece

Chevrolet-Corvette-C5-97-04-Body-Kit-Creations-Carbon-Fiber-ZR-Edition-6-Piece-01-yarc Chevrolet Corvette C5 97-04 Body Kit Creations Carbon Fiber ZR Edition 6 Piece

Chevrolet Corvette C5 97-04 Body Kit Creations Carbon Fiber ZR Edition 6 Piece
Carbon Creations Carbon Fiber ZR Edition – 6 Piece Body Kit fits Chevrolet Corvette C5 97-04. Includes ZR Edition Front Bumper Cover (105693) Carbon Creations ZR Edition Front Lip Under Spoiler Air Dam (105695) Carbon Creations ZR Edition Side Skirts Rocker Panels (105697) ZR Edition Rear Bumper Cover (105698) Carbon Creations ZR Edition Rear Diffuser (105700). Carbon Creations designs and manufactures innovative and creative aerodynamic styles in carbon fiber. This product line focuses entire on carbon fiber products designed specifically for your vehicle. Each product is manufactured with the highest quality standards and inspected by our quality control team before leaving our facility. These products utilize Grade A carbon fiber material and are finished with a high quality clear coat with UV protection. Our products are designed to be as light as possible while retaining durability and ensuring safety. Carbon Creations products are up to 70% lighter than OEM factory parts. Over the past few years, Carbon Creations products have been widely exposed by the media as being the most prestigious carbon aerodynamic brand in the industry. Parts such as mesh grilles, lights, splitters, canards, paint, wings, decals, and other accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description. You may be required to hire a broker to get the item(s) across the border. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Since damage may occur occasionally in transit, it is important that the parts be thoroughly inspected upon receipt. We have staff that responds to emails quickly. If you decide you do not want the item, you can return it within 60 days of receipt. Please request a Return Authorization number to write on the box of the item being sent back. Aftermarket body kits, hoods, trunks, fenders, and wings are not created by their respective vehicle manufacturers and typically do not exhibit OEM fit-and-finish right out of the box. Carbon Fiber parts come with a clear coat and may be ready to be installed out of the box with little or no modifications. Duraflex, VFiber, and Urethane parts only come with a top layer gel coat and may require additional surface preparation such as sanding and filling before the parts can be painted and installed. An example of such prep work could include sanding down the area, using filler, and then sanding the area down again. You should then prime the area and add more filler, if needed. Sand once more and prime the area to be ready for paint. Body kits do not come pre-drilled. You or your shop will have to align the parts prior to drilling it to achieve proper fitment. Fitment modifications may be required on body kits, hoods, trunks, fenders, and wings and can include sanding, shaving, trimming, application of heat, and/or molding. You or your shop may also be required to modify or remove the existing reinforcement bar or shock absorber. The part molds are test-fitted before production begins, but since the parts are created with hand-laid fiberglass or carbon fiber, they have slight variations from piece to piece. Often times a bumper that appears to be several inches too wide for a vehicle can, and will, fit properly on a given vehicle if approached appropriately and with sufficient knowledge. However, if you are going to an experienced aftermarket professional, they should have absolutely no problem getting these parts installed. The item “Chevrolet Corvette C5 97-04 Body Kit Creations Carbon Fiber ZR Edition 6 Piece” is in sale since Friday, May 8, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Body Kits”. The seller is “factory_authorized_dealer” and is located in California. This item can be shipped to United States.
  • Brand: Extreme Dimensions
  • Manufacturer Part Number: 105709
  • Part Brand: Carbon Creations
  • Free Local Pickups: Message Me For A Discount
  • ***APP USERS***: READ THE ENTIRE LISTING DESCRIPTION
  • Material: Carbon Fiber

Chevrolet Corvette C5 97-04 Body Kit Creations Carbon Fiber ZR Edition 6 Piece

Framed Chevrolet Corvette Zr1 Supercar 5 Piece Canvas Print Wall Art Decor

Framed-Chevrolet-Corvette-Zr1-Supercar-5-Piece-Canvas-Print-Wall-Art-Decor-01-xh Framed Chevrolet Corvette Zr1 Supercar 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Zr1 Supercar 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Zr1 Supercar 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Zr1 Supercar 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Zr1 Supercar 5 Piece Canvas Print Wall Art Decor

Framed Chevrolet Corvette Zr1 Supercar 5 Piece Canvas Print Wall Art Decor
If you order your print FRAMED (which we highly recommend), you will receive it professionally stretched, mounted and framed. Ready to hang with no additional work required! It is up to you at that point if you would like to put them up flat on your wall, have them framed locally, or frame them yourself. Any product you return must be in the same condition you received it and in the original packaging. We will try our best to solve it for you. We work hard to ensure that every customer is satisfied. The world will become better when we do good things every day. Thank you so much! Thank you for visiting our store! The item “Framed Chevrolet Corvette Zr1 Supercar 5 Piece Canvas Print Wall Art Decor” is in sale since Wednesday, July 24, 2019. This item is in the category “Home & Garden\Home Décor\Posters & Prints”. The seller is “luxuryprint” and is located in Shanghai. This item can be shipped worldwide.
  • Country/Region of Manufacture: China
  • Style: Art Deco
  • Material: Fabric
  • Theme: Art
  • Original/Reproduction: Original
  • Type: Poster
  • Features: Framed
  • Color: Multi-Color
  • Subject: art
  • Coating: Water-Proof
  • Brand: Corvette

Framed Chevrolet Corvette Zr1 Supercar 5 Piece Canvas Print Wall Art Decor

C6 Champ Rear Wing Spoiler 1 Piece fits Chevrolet Corvette 05-13 Duraflex

C6-Champ-Rear-Wing-Spoiler-1-Piece-fits-Chevrolet-Corvette-05-13-Duraflex-01-jc C6 Champ Rear Wing Spoiler 1 Piece fits Chevrolet Corvette 05-13 Duraflex
C6 Champ Rear Wing Spoiler 1 Piece fits Chevrolet Corvette 05-13 Duraflex

C6 Champ Rear Wing Spoiler 1 Piece fits Chevrolet Corvette 05-13 Duraflex
C6 Champ Rear Wing Spoiler 1 Piece fits Chevrolet Corvette 05-13 Duraflex. Hand laid, high quality 6 oz. High quality weather resistant aluminum mesh grille (where applicable). Proprietary polymer blend for maximum flexibility. Increased durability and longer service life. Reduced damage rate up to 75%. Name: C6 Champ Rear Wing Spoiler 1 Piece fits Chevrolet Corvette 05-13 Duraflex. Questions about this part? Send us a message for more info. Vehicles depicted are highly modified for show which may include molding or adding to the original piece. Parts such as lights, splitters, canards, paint, wings, and others accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description. Dry fit the part before making any modifications. Chips and cracks in the gelcoat or fiberglass will exist and can be easily fixed during the prepping process. The primer finish must be sanded and other prep work will be required prior to painting. Fiberglass parts are hand made, they are not machine made and therefore not perfect. Be sure to use hood pins if installing a fiberglass hood. Due to the hand laid nature of fiberglass, this product is NOT a direct bolt-on. Fiberglass requires prepping, sanding, shaving, filling gaps, cutting, or other types of body work. These modifications may also include removal or cutting of the reinforcement bar. A professional body shop with extensive knowledge of custom fiberglass is required for installation. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Made with fibeglass and plastic resin. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization. Will it fit my vehicle? Pay close attention to the make, model and year, but also the trim level. Verify with us if you are unsure. All sales are final. Body parts MUST be installed professionally by an experienced body shop. When will I receive my product? Average time for most orders is 2-3 weeks. In rare instances you may have to wait the full 40 days, as stated on our listing. Claims will not be accepted for damages realized or noticed after driver has left the premises. The item “C6 Champ Rear Wing Spoiler 1 Piece fits Chevrolet Corvette 05-13 Duraflex” is in sale since Thursday, May 2, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Spoilers & Wings”. The seller is “overboostshop” and is located in Fullerton, California. This item can be shipped to United States, Canada.
  • Manufacturer Part Number: 114105
  • Requires modification: Yes
  • Drilling required: Yes
  • Instructions: Not included
  • Hardware: Brackets and Screws not included
  • Insurance: Yes, must inspect and sign ‘Damaged’ if damaged
  • Professional installation required: Yes
  • Material: FRP (fiberglass reinforced plastic)
  • Surface Finish: FRP (fiberglass reinforced plastic)
  • Brand: Duraflex
  • Color: Unpainted
  • Approximate Dimension: Please check description
  • Part Brand: Duraflex
  • Warranty: No
  • Feature 1: Ships direct from USA based warehouse(s)
  • Feature 2: Authorized dealer
  • Fitment Type: Performance/Custom

C6 Champ Rear Wing Spoiler 1 Piece fits Chevrolet Corvette 05-13 Duraflex

Duraflex C6 ZR Front Fender Spats 2 Piece for Corvette Chevrolet 05-13 ed 1

Duraflex-C6-ZR-Front-Fender-Spats-2-Piece-for-Corvette-Chevrolet-05-13-ed-1-01-ufbs Duraflex C6 ZR Front Fender Spats 2 Piece for Corvette Chevrolet 05-13 ed 1

Duraflex C6 ZR Front Fender Spats 2 Piece for Corvette Chevrolet 05-13 ed 1
Duraflex C6 ZR Front Fender Spats 2 Piece for Corvette Chevrolet 05-13 ed_115642. Questions about this part? Send us a message for more info. Description / Notes: ” NEW — Duraflex C6 ZR Front Fender Spats 2 Piece for Corvette Chevrolet 05-13 ed_115642″. Hand laid, high quality 6 oz. High quality weather resistant aluminum mesh grille (where applicable). Proprietary polymer blend for maximum flexibility. Increased durability and longer service life. Reduced damage rate up to 75%. Dry fit the part before making any modifications. Chips and cracks in the gelcoat or fiberglass will exist and can be easily fixed during the prepping process. The primer finish must be sanded and other prep work will be required prior to painting. Fiberglass parts are hand made, they are not machine made and therefore not perfect. Be sure to use hood pins if installing a fiberglass hood. Due to the hand laid nature of fiberglass, this product is NOT a direct bolt-on. Fiberglass requires prepping, sanding, shaving, filling gaps, cutting, or other types of body work. These modifications may also include removal or cutting of the reinforcement bar. A professional body shop with extensive knowledge of custom fiberglass is required for installation. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Made with fibeglass and plastic resin. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization. Vehicles depicted are highly modified for show which may include molding or adding to the original piece. Parts such as lights, splitters, canards, paint, wings, and others accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description. Will it fit my vehicle? Pay close attention to the make, model and year, but also the trim level. Verify with us if you are unsure. When will I receive my product? Average time for most orders is 2-3 weeks. In rare instances you may have to wait the full 40 days, as stated on our listing. Claims will not be accepted for damages realized or noticed after driver has left the premises. Body parts MUST be installed professionally by an experienced body shop. All sales are final. The item “Duraflex C6 ZR Front Fender Spats 2 Piece for Corvette Chevrolet 05-13 ed 1″ is in sale since Thursday, February 6, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Fenders”. The seller is “overbooststore” and is located in Fullerton, California. This item can be shipped to United States, Canada.
  • Manufacturer Part Number: 115642
  • Requires modification: Yes
  • Drilling required: Yes
  • Instructions: Not included
  • Hardware: Brackets and Screws not included
  • Insurance: Yes, must inspect and sign ‘Damaged’ if damaged
  • Professional installation required: Yes
  • Material: FRP (fiberglass reinforced plastic)
  • Surface Finish: FRP (fiberglass reinforced plastic)
  • Brand: Duraflex
  • Color: Unpainted
  • Approximate Dimension: Please check description
  • Part Brand: Duraflex
  • Warranty: No
  • Feature 1: Ships direct from USA based warehouse(s)
  • Feature 2: Authorized dealer
  • Fitment Type: Performance/Custom

Duraflex C6 ZR Front Fender Spats 2 Piece for Corvette Chevrolet 05-13 ed 1

For Chevy Corvette 88-95 Brake Rotors Diamond Slot Dimpled & Slotted 1-Piece

For-Chevy-Corvette-88-95-Brake-Rotors-Diamond-Slot-Dimpled-Slotted-1-Piece-01-dic For Chevy Corvette 88-95 Brake Rotors Diamond Slot Dimpled & Slotted 1-Piece
For Chevy Corvette 88-95 Brake Rotors Diamond Slot Dimpled & Slotted 1-Piece
For Chevy Corvette 88-95 Brake Rotors Diamond Slot Dimpled & Slotted 1-Piece

For Chevy Corvette 88-95 Brake Rotors Diamond Slot Dimpled & Slotted 1-Piece
Save up to 35% Daily deals. CARiD Wheels & Tires. For Chevy Corvette 88-95 Brake Rotors Diamond Slot Dimpled & Slotted 1-Piece. In Stock: Ships in 2 days. On the go Daily Deals. Always the correct part. We know our products. Diamond Slot Dimpled and Slotted Vented 1-Piece Front Brake Rotors (D55-011-BP) by SP Performance®. Quantity: 2 Per Pack. You want your brakes to look like a million, but need them to stop on a dime. SP Performance Diamond slot rotors deliver. They stop on a dime and add a little bling-bling to your ride. Designed for strength and better stopping power with an exclusive new look, Diamond Slot Rotors not only look cool, they also stop as good as they look. This slotted design was created to maximize the out-gassing while maintaining the structural integrity of the rotor. The series of slots and diamond “wipes” the surface of the pad clean, and vent expanding gases which cause brake fade at higher temperatures. The slots also greatly improve wet weather braking by preventing hydroplaning between the pad and rotor. Diamond slot rotors are a unique design in slotted technology that offers styling, performance and reliability. Rotor coating will disappear with time where the brake pads contact the rotor. Diamond SlotT Dimpled and Slotted Vented 1-Piece Front Brake Rotors (D55-011-BP) by SP Performance®. Driving Style: Performance / Racing. Rotor Design: Rotors Only. Rotor Style: Dimpled & Slotted. Rotor Material: Cast Iron. Rotor Finish: Black Zinc. Rotor Diameter: 304mm (11.969). Lug Holes Quantity: 5. Sized to match OEM dimensions while providing superior braking performance. Styling, performance and reliability. Amazing design and exclusive new look. Bolt-on hassle free installation. Increased brake pad bite reduces stopping distances. Vents gases and eliminates brake fade. Diamonds and Slots reduce fade ensuing reliable braking performance. Improves wet weather braking. Diamond slot help dampen expanding gases that push on the pads. Corrosion Resistant Coating for long-lasting protection against rust. Maximize Performance while maintaining structural integrity of the rotor. Guaranteed not to crack for the life of the rotors. Diamond Slot Rotors make your vehicle stop fast and look like a million behind your wheels. Made using durable materials to endure for a long time. Designed to combine excellent performance and reliability. Guaranteed to provide exceptional wear resistance. Made to provide matchless quality and improve your driving comfort. Proudly made in the USA. Helps increase brake pad bite, improves air circulation and cooling. The slots also vent gasses, reduce brake fade and stop brake hydroplaning in wet weather, reducing stopping distances. Creates a recess to dampen expanding gasses that push against the brake pads and gives the rotors a very unique look. SP Performance discs are made using the finest quality castings that exceed OEM specifications. Designed with the use of CAD software and produced on CNC machines insures the highest quality and consistent performance. Diamond Slot Anti-Corrosion Finish. Corrosion resistant finishes give a stunning clean look behind your wheels while preventing rust, corrosion and oxidation. SP Performance Diamond Slot Brake Rotors With Gray ZRC Finish: The ZRC coating provides long-lasting protection against corrosion in the most hostile salt-water environments. After being applied, ZRC provides the highest level of galvanic protection. The film of ZRC is conductive. After the coating heats up during use, it bonds permanently to the metal surface. It will not allow the metal to corrode, even when the surface is scratched. SP Performance rotors provide many advantages like quality, durability, looks and value. But the most important advantage is that your vehicle will stop quicker. Diamond Slot discs provide up to 30% better braking. If, for example, your vehicle takes 30 feet to come to a stop with your stock rotors, then a 30% improvement is equal to 9 feet. During an emergency stop, 9 feet can make all the difference between a safe stop and a dangerous accident. SP Performance is the originator not the imitator. Diamond slotting technology was originally developed by SP Performance. The diamond and slot design was created to maximize the performance while maintaining the structural integrity of the rotor. But don’t be fooled, there are many imitators out there. If they are not manufactured by SP Performance then they’re not true Diamond Slot Rotors. No matter whether you’re doing basic repairs and maintenance, modifying your car’s street appeal and performance, or adding high-tech lighting and electronics, our great selection of brand name products and knowledgeable associates will ensure success with all your automotive projects. We offer the finest and widest variety of automotive parts and accessories using state-of-the-art technologies, and employ the most dedicated and creative team members. These individuals focus on exceeding expectations of customers who want the exact component at the best price in the quickest time. Our goal is to provide a WOW experience during every customer interaction. Whatever you need, whether it’s a replacement part to fix a broken down vehicle, a crash part to repair a vehicle from an accident, perhaps a new set of custom wheels and tires, or something to make it flashy or faster, lifted or lowered, we will be your one-stop shop. We fulfill our mission daily with enthusiasm and optimism, learning from our ongoing opportunities and successes. We enjoy a modern yet tricked out work atmosphere while ensuring a true learning environment to develop our people. The item “For Chevy Corvette 88-95 Brake Rotors Diamond Slot Dimpled & Slotted 1-Piece” is in sale since Friday, October 12, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware”. The seller is “caridautoparts” and is located in Simsbury, Connecticut. This item can be shipped to United States.
  • Brand: SP Performance
  • Manufacturer Part Number: D55-011-BP
  • Other Part Number: 886440376
  • Product Type: Performance Brakes, Pads & Rotors
  • Product SubType: Performance Brake Rotors
  • UPC: Does not apply
  • Solid or Vented Rotor: Vented
  • Rotor Style: Dimpled, Slotted
  • Rotor Material: Cast Iron
  • Rotor Finish: Black Zinc
  • Rotor Design: Rotors Only
  • Rotor Diameter: 304mm (11.969″)
  • Rotor Construction: 1-Piece
  • Number of Pieces: 2 per Pack
  • Lug Holes Quantity: 5
  • Driving Style: Performance / Racing
  • Brand Type: Aftermarket Branded
  • Brakes Location: Front
  • Placement on Vehicle: Front
  • Series: Diamond Slot
  • Material: Iron
  • Product Name: Brake Rotors
  • Fitment Type: Performance/Custom
  • Product Details: Performance Brake Dimpled and Slotted Rotor
  • Finish: Black

For Chevy Corvette 88-95 Brake Rotors Diamond Slot Dimpled & Slotted 1-Piece

Framed Chevrolet Corvette Burnout Car Poster 5 Piece Canvas Print Wall Art Decor

Framed-Chevrolet-Corvette-Burnout-Car-Poster-5-Piece-Canvas-Print-Wall-Art-Decor-01-gcd Framed Chevrolet Corvette Burnout Car Poster 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Burnout Car Poster 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Burnout Car Poster 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Burnout Car Poster 5 Piece Canvas Print Wall Art Decor
Framed Chevrolet Corvette Burnout Car Poster 5 Piece Canvas Print Wall Art Decor

Framed Chevrolet Corvette Burnout Car Poster 5 Piece Canvas Print Wall Art Decor
If you order your print FRAMED (which we highly recommend), you will receive it professionally stretched, mounted and framed. Ready to hang with no additional work required! It is up to you at that point if you would like to put them up flat on your wall, have them framed locally, or frame them yourself. Any product you return must be in the same condition you received it and in the original packaging. We will try our best to solve it for you. We work hard to ensure that every customer is satisfied. The world will become better when we do good things every day. Thank you so much! Thank you for visiting our store! The item “Framed Chevrolet Corvette Burnout Car Poster 5 Piece Canvas Print Wall Art Decor” is in sale since Friday, May 10, 2019. This item is in the category “Home & Garden\Home Décor\Posters & Prints”. The seller is “luxuryprint” and is located in Shanghai. This item can be shipped worldwide.
  • Country/Region of Manufacture: China
  • Style: Art Deco
  • Material: Fabric
  • Original/Reproduction: Original
  • Type: Poster
  • Features: Framed
  • Color: Multi-Color
  • Subject: Art
  • Coating: Water-Proof
  • Brand: Corvette
  • Bundle Listing: No

Framed Chevrolet Corvette Burnout Car Poster 5 Piece Canvas Print Wall Art Decor